For Pricing or Other Information Call 1-866-727-7256 or EMAIL
| Other Desktop Accessories | |
| ● | Air Assist Option |
| ● | Back Sweep Air Assist |
| ● | Cutting Table |
| ● | HPDFO Optics |
| ● | Rotary Fixture |
Advantage
The Non-Computer Controlled Air Assist provides the same lens and mirror protection and flame suppression (using a nozzle) as the more sophisticated Computer Controlled Air Assist but with a single gas and no computer control. Turning the compressor pump or gas supply on lets air or gas flow. Turning the compressor pump or gas supply off stops the air or gas flow.
Compatibility
All VersaLASER platforms. Requires an external air supply. The External Compressor Unit for Air Assist is highly recommended. Any air or gas supply not provided by ULS must have a regulator set to no higher than 60 PSI. Filtered air from a compressor using oil is not acceptable. Air must be oil free, dried and filtered.
The VersaLASER Interface+ has an option Print Direction, for front-to-back or back-to-front engraving. Front-to-back engraving with the Air Assist Cone and the Back Sweep Air Assist option works well on rubber stamps or other dusty applications. It helps keep the material clean and also keeps the machine cleaner.
For cutting applications the Air Assist Option is superior. It includes the hook cone is also superior for heavy engraving on highly flammable materials because the downward air jet protects the focus lens from flame damage.
Purpose:
Suppresses flaming and assists with optics protection. .
|
AREAS SERVED BY THE ENGRAVERS NETWORK - ARLINGTON, TX - Phone 1-866-727-7256 |
|||||||||||||||||||
|
Alaska (AK) |
Delaware (DE) |
Indiana (IN) |
Michigan (MI) |
Nebraska (NE) |
Oklahoma (OK) |
Texas (TX) |
Puerto Rico (PR) |
||||||||||||